April 20, 2012 Integrated Device Technology, Inc. has introduced a new family of precision temperature sensors targeted at ultra-low-power solid state drive applications. Read more

March 21, 2012 Integrated Device Technology, Inc. has introduced what the company claims is the world’s most advanced single-phase power metering SoC for smart grid applications. The new device features the industry’s widest dynamic range and an unprecedented level of integration, enabling smart meter manufacturers to improve accuracy, while simplifying their designs and lowering overall system cost. Read more

March 13, 2012 Integrated Device Technology, Inc. has unveiled the world's first true single-chip wireless power transmitter accompanied by the industry's highest-output-power single-chip receiver solution. IDT's highly integrated multi-mode transmitter reduces board footprint by 80 percent and solution bill-of-materials (BOM) cost by 50 percent compared to existing solutions. Read more

February 28, 2012 Integrated Device Technology, Inc. has unveiled a new series of low-jitter silicon-germanium (SiGe) voltage-controlled surface acoustic wave (SAW) oscillators (VCSOs). This new series of products supplements IDT’s popular M675 series and high-performance timing portfolio with a higher-frequency low-jitter oscillator designed to meet the stringent requirements of fiber optic telecom applications. Read more

February 13, 2012 Integrated Device Technology, Inc. has unveiled what the company claims is the world’s first low-power, multi-output PLL clock generators using IDT’s patented Piezoelectric MEMS ( pMEMS) technology. The new devices expand IDT’s leading timing portfolio by consolidating the function of two crystal oscillators, completely eliminating the need for external crystals and oscillators. Read more

January 26, 2012 Integrated Device Technology, Inc. is claiming the industry’s first FlatNoise dual intermediate frequency (IF) variable gain amplifier (VGA) for multi-mode 2G/3G/4G wireless base station transceivers. IDT’s devices offer the industry’s best noise figure (4 dB) for maximum gain and virtually no degradation when gain is reduced, improving quality-of-service (QoS) and easing the signal-to-noise ratio (SNR) requirements of the downstream data converter to reduce system cost. Read more

December 16, 2011 Integrated Device Technology, Inc., has expanded the company’s analog wireless infrastructure portfolio with two low-power, low-distortion radio frequency (RF) to intermediate frequency (IF) mixers for cellular base station equipment. The new devices improve system third-order intermodulation (IM3) performance and reduce power consumption, resulting in improved quality of service (QoS) and enabling smaller enclosures with increased reliability in 4G wireless infrastructure applications. Read more

December 1, 2011 Integrated Device Technology, Inc., has developed and demonstrated the world's first commercially available oscillators incorporating piezoelectric microelectromechanical system (pMEMS) resonators. IDT’s oscillators take advantage of the pMEMS resonator's high native frequencies, making them well-suited to replace traditional quartz-based oscillators in any application. Read more

November 15, 2011 INSIDE Secure has collaborated with Integrated Device Technology to bring to market a compact, single-package secure microcontroller and oscillator solution that reduces the bill of materials when designing USB tokens for authentication and digital signatures. Read more

October 28, 2011 Integrated Device Technology, Inc., has released the industry’s first CMOS oscillators to feature a breakthrough ±50 ppm frequency accuracy and ultra-low power consumption. The new devices replace traditional quartz crystal-based oscillators (XOs) for up to 75% power savings in any of a broad range of applications requiring a ±50 ppm timing reference, including computing, communications, and consumer markets. Read more

October 13, 2011 Integrated Device Technology, Inc., has released what the company claims is the industry’s first integrated timing, thermal sensor and fan control solution targeted at PC mobile platforms, digital video recorders (DVRs), set top boxes (STBs), Network Attached Storage (NAS) and enterprise Ethernet switches and routers. The new family of devices reduces bill of materials (BOM) and application footprint to save cost and free-up valuable board space in densely populated enclosures. Read more

September 21, 2011 Integrated Device Technology, Inc., is claiming the industry's most flexible Universal Frequency Translators (UFTs) with industry-leading phase noise performance. Read more

September 8, 2011 Integrated Device Technology, Inc., has released what the company claims is the world’s highest performance family of Gen 3 PCI Express (PCIe) switches targeted at solid-state drive (SSD) storage arrays and cloud computing applications. Read more

September 8, 2011 Wireless chip and technology firm Qualcomm Inc., has agreed to take over the video IC design teams from Integrated Device Technology Inc., and related assets and to include chips from IDT in its reference designs as part of a closer working relationship between the companies. Read more

August 26, 2011 Integrated Device Technology, Inc. has added a low-jitter Voltage Controlled Surface Acoustic Wave (SAW) Oscillator (VCSO) for high-end optical networking and telecom applications. The new VCSO clock generator expands IDT’s industry-leading portfolio of clock and timing solutions. Read more

July 28, 2011 Integrated Device Technology, Inc. has released what the company claims is the world’s first audio subsystem with integrated programmable clock generator for portable applications. The new device minimizes board space and reduces system cost through integration, and provides time-to-market advantages by eliminating the need for multiple external crystals and oscillators that typically involve long lead times. Read more

July 26, 2011 Integrated Device Technology, Inc. has developed a power savings and performance enhancement architecture for high frequency voltage regulator designs targeted at computing applications. The new patent pending “HyperGear” technology dynamically adjusts the CPU voltage, peripheral bias voltage, and CPU clocking frequency based on the CPU usage demand and can provide more than 10% efficiency improvement while simultaneously boosting CPU performance. Read more

June 2, 2011 Integrated Device Technology, Inc., has announced the industry’s first PCI Express Gen2 to Serial RapidIO (S-RIO) Gen2 protocol conversion bridge that extends scalable RapidIO-enabled peer-to-peer multiprocessor clusters to the x86 processor environment. The device brings together the best of two powerful interconnect protocols and opens up new applications and markets for RapidIO. Read more

April 27, 2011 Integrated Device Technology, Inc. has unveiled a new family of poly-phase power metering ICs that offer the widest dynamic range and lowest temperature coefficient in the industry. The new devices allow smart energy meter manufacturers to increase performance while consolidating functionality and lowering cost. Read more

March 29, 2011 Integrated Device Technology, Inc., has added the sixth member to its portfolio of RapidIO Gen2 switches. The intermediately-sized CPS-1432 comes in response to the strong demand for RapidIO Gen2 switches fueled by the expansion of 4G wireless infrastructure and the growing industry adoption of RapidIO for defense, aerospace, server, medical imaging, and video applications. Read more

March 23, 2011 Integrated Device Technology, Inc. has introduced a digitally-controlled IF VGA with high SNR for improved Quality of Service (QoS) for receiver systems located in cellular base stations and other wireless infrastructure equipment. The new device expands IDT's product offerings for base station equipment in the growing 4G wireless infrastructure market, which today includes high performance timing, RapidIO solutions, and other devices from IDT's rich communications portfolio.   Read more

December 7, 2010 Integrated Device Technology, Inc. is claiming world’s first true single-layer multi-touch projected capacitive touch screen technology for screen sizes up to five inches. The latest technology addition to the IDT PureTouch family streamlines touch screen sensor manufacturing and eliminates multi-touch ghosting effects common in self-capacitive multi-layer solutions. Read more

November 4, 2010 Integrated Device Technology, Inc. has unveiled a new real-time clock with temperature compensation that provides high accuracy over the full industrial temperature range. In addition, the new family of timing devices also features tamper-detect functionality to help protect systems that are prone to hacking. Read more

October 26, 2010 Integrated Device Technology, Inc. is claiming the world's first family of high-definition PC audio codecs to feature the DDX-based class-D modulation technology developed by Apogee Technology. The efficient 3-state modulation technique extends battery life, eliminates pops and clicks, and reduces electromagnetic interference (EMI) in notebook and desktop audio systems. Read more

October 21, 2010 Integrated Device Technology, Inc., is claiming the industry's most accurate all-silicon CMOS oscillator, which achieves an industry-leading 100ppm total frequency error across temperature, voltage and other factors. Read more

October 19, 2010 Integrated Device Technology, Inc., has unveiled the latest member of the IDT PanelPort ViewXpand family - the IDT VMM1400 multi-monitor controller, which is claimed to be the world’s first DisplayPort-based device to allow the user to connect up to four monitors to a single DisplayPort connection and support vertical image expansion. Read more

October 6, 2010 The CPS-1848 Serial RapidIO Gen2 switch, developed by Integrated Device Technology, Inc., is aiming to provide the foundation for an evolving Serial RapidIO ecosystem and is being rapidly adopted by several vendors, including CommAgility and N.A.T. Read more

July 26, 2010 Integrated Device Technology, Inc., has unveiled an integrated microcontroller-based Intelligent System Power Management Solution targeted for portable consumer products, such as Smartphones, portable navigation devices, mobile Internet devices and eBooks. Read more

July 22, 2010 Integrated Device Technology, Inc., is claiming the industry's first motion-compensated frame rate conversion processors with an integrated resolution-enhancement engine for use in 120 Hz and 240 Hz televisions and high-definition video projectors. Read more

May 18, 2010 Integrated Device Technology, Inc has introduced the newest members of the IDT PureTouch family of capacitive touch devices. Read more

May 4, 2010 Integrated Device Technology, Inc., has unveiled its all-silicon CMOS oscillators, the MM8202 and the MM8102 in wafer and package forms, making IDT claim it is the only company to offer quartz-crystal-level performance with a CMOS oscillator in both forms. Read more

March 29, 2010 Mixed signal semiconductor solutions provider, Integrated Device Technology, Inc. (IDT), has added the newest members of its IDT VersaClock family of timing devices. Read more

March 26, 2010 Mixed signal semiconductor solutions provider, Integrated Device Technology, Inc., (IDT) is to work on a joint development program with Samplify Systems, a provider of signal compression technology, semiconductors, and solutions. Read more