News about Analog Devices
Mouser signs global distribution deal with ADI
May 7, 2013
Mouser Electronics, Inc. has entered into a worldwide distribution agreement with Analog Devices, Inc. that covers Analog Devices’ complete product portfolio, including data converters, amplifiers, MEMS, DSPs, RF and power management ICs and associated development tools.
Read more
Silica starts roll out of design support strategy focused on power applications
May 1, 2013
Silica, an Avnet, Inc. company, has unveiled an initiative that aims to make the company the power experts in European semiconductor distribution. The new strategy will build on Silica’s ability to support end-to-end designs both at system and device level.
Read more
Analog Devices CEO Jerry Fishman dies
April 3, 2013
Jerry Fishman, longtime CEO of chip vendor Analog Devices Inc. died Thursday (March 28) after an apparent heart attack. He was 67 years old.
Read more
Smallest MEMS microphone supports hearing aid applications offers low Equivalent Input Noise and power saving benefits
March 27, 2013
Analog Devices, Inc. has introduced a high performance MEMS microphone developed specifically for hearing aid applications.
Read more
RMS power detector claims unparalleled frequency performance and flexibility
March 26, 2013
Analog Devices, Inc. has introduced a high performance RMS power detector which operates up to 10 GHz and has a 67 dB measurement range.
Read more
Analog Devices collaborates with Mathworks to offer engineering students low-cost learning platform
March 25, 2013
Analog Devices, Inc. has introduced a low-cost hardware-software solution focusing on circuit testing designed for the engineering education market.
Read more FPGA mezzanine cards support JESD204B-compatible A/D converter-to-FPGA connectivity
March 5, 2013
Analog Devices has released FPGA development platform-compatible FPGA mezzanine cards (FMC) incorporating JEDEC JESD204B SerDes (serialiser/de-serialiser) technology for the rapid prototyping of high-speed JESD204B A/D converter-to-FPGA platforms.
Read more Analog Devices and Bourns unveil industry's first complete evaluation board with certified RS-485 electro-magnetic protection
February 27, 2013
Analog Devices, Inc. and Bourns, Inc., have introduced what the companies claim is the industry’s first certified RS-485 evaluation board for protecting against EMC (electro-magnetic compatibility) events in industrial and instrumentation equipment.
Read more FPGA mezzanine card rapid prototyping kit simplifies JESD204B-compatible A/D converter-to-FPGA connectivity
February 26, 2013
Analog Devices, Inc. has unveiled a new addition to the company’s line of FPGA development platform-compatible FPGA mezzanine cards (FMC) incorporating JEDEC JESD204B SerDes (serialiser/de-serialiser) technology.
Read more Isolated error amplifiers outperform optocouplers and shunt regulators in power supply applications
February 26, 2013
Analog Devices, Inc. has introduced isolated error amplifiers that provide power supply designers with a higher performing, single-chip alternative to isolation techniques based on optocouplers and shunt regulators.
Read more Low cost, octal ultrasound AFE with on-chip RF decimator and JESD204B serial interface helps simplify designs
February 25, 2013
Analog Devices, Inc. has introduced the AD9675 8-channel Ultrasound Analog Front End (AFE) with on-chip RF decimator and JESD204B serial interface, designed for mid- to high-end portable and cart-based medical and industrial ultrasound systems.
Read more Multi-output, 1.65-GHz clock buffer delivers low jitter to optimize noise performance in ultra-high-speed data converters
February 14, 2013
Analog Devices, Inc. has introduced a clock buffer and divider IC (integrated circuit) that combines high-speed, low jitter (41 fs across the 12-kHz to 20-MHz band) and selectable division capability.
Read more Analog Devices expands online technical support community for design engineers
February 5, 2013
Analog Devices, Inc’s EngineerZone online technical support community is now supportsingADI’s full line of signal processing offerings.
Read more Dual 16-bit, 1.6-GSPS DAC synthesizes high-quality wideband signals from baseband to high intermediate frequencies
December 24, 2012
Analog Devices, Inc. has introduced the AD9142 dual-channel, 16-bit, 1.6-GSPS D/A converter, which supports high data rates and complex modulation schemes required in communications, test and instrumentation, and defense and aerospace systems.
Read more Dual-channel differential amplifier drives high frequency ADCs with industry’s best distortion and noise performance
December 18, 2012
Analog Devices, Inc. has introduced a dual-channel differential amplifier for driving high speed 12- to 18-bit A/D converters.
Read more Quad 12-bit and single 14-bit, 180-MSPS DACs simplify complex waveform generation functions
December 12, 2012
Analog Devices, Inc. has introduced the AD9106 quad-channel, 12-bit, and the AD9102 single-channel, 14-bit, 180-MSPS waveform generators, integrating on-chip static random access memory (SRAM) and direct digital synthesis (DDS) for complex waveform generation.
Read more 24-bit sigma-delta A/D converter achieves twice the speed of competing converters and claims industry’s best noise performance
December 4, 2012
Analog Devices, Inc. has introduced a multiplexed 24-bit sigma-delta A/D converter that doubles the throughput rate of alternative sigma-delta converters while dissipating less power.
Read more 256-channel, 16-bit digital X-ray analog front end delivers industry’s best combination of noise, power and image quality
November 28, 2012
Analog Devices, Inc., has introduced a highly integrated digital X-ray analog front end (AFE) which claims to offer the industry’s lowest noise performance in multiple power-mode options, and the highest image quality.
Read more Farnell element14 collaborates with Analog Devices and Digilent to promote portable analog design kits among engineering students
November 14, 2012
Farnell element14, the European trading brand of Premier Farnell, is to distribute Digilent’s recently developed Analog Discovery Kit which is part of the Analog Devices, Inc. ADI global University Program.
Read more Flash LED drivers offer best efficiency for next-generation smartphones
November 5, 2012
Analog Devices introduced two flash LED drivers featuring best in class efficiency to extend battery life in smartphones and tablets and to limit the load on the battery during flash and torch events. The ADP1660 is a dual 750-mA (1500-mA total) flash LED driver available in a 2.0-mm x 1.6-mm 12-ball WLCSP package. The ADP1649 is a single 1000-mA LED driver available in a 2.0-mm x 1.5-mm 12-ball WLCSP package.
Read more RF clock IC claims industry's best jitter performance and fastest output speed to meet demands of high-speed data converters
October 30, 2012
Analog Devices, Inc. has introduced an RF clock IC, (radio frequency clock integrated circuit) with the industry’s lowest jitter for communications and instrumentation equipment that requires high-speed data conversion and optimum SNR (signal-to-noise ratio) performance.
Read more New microwave IC portfolio is extended with family of high-performance voltage controlled oscillators
October 30, 2012
Analog Devices, Inc. has introduced a new family of microwave ICs, the ADF55xx series voltage controlled oscillators (VCOs), for point-to-point (PtP), instrumentation/ test equipment and satellite communication applications.
Read more Analog Devices university program design contest now open
October 24, 2012
Analog Devices (ADI) has issued a call for entries for the first annual ADI University Program Design Contest, which is open to college and university engineering students and professors worldwide.
Read more Space-saving DOCSIS 3.0-compliant RF D/A converter operates at one-third the power of competing devices
October 16, 2012
Analog Devices, Inc. has introduced two RF (radio frequency) D/A converters that are able to synthesise the entire downstream (transmit) cable spectrum from a single D/A converter port.
Read more MEMS accelerometer with min/max offset sensitivity to temperature delivers predictable and quantifiable performance
October 4, 2012
Analog Devices, Inc. has introduced what the company claims the industry’s first MEMS accelerometer with min/max offset sensitivity over the full temperature range.
Read more Isolated metrology chipset ensures energy meter magnetic immunity
October 2, 2012
Analog Devices, Inc., has introduced what the company claims is the industry’s first fully isolated metrology chipset designed for polyphase energy metering applications.
Read more DC-DC switching controller family offers current-mode and voltage-mode configuration options for high-current applications
September 14, 2012
Analog Devices, Inc. (ADI) has introduced a wide-input-range, synchronous, step-down DC-to-DC controller with voltage tracking and synchronisation capability.
Read more Industry's fastest 300-meter UTP cable equalizer for analog video distribution offers the lowest power consumption
August 22, 2012
Analog Devices, Inc., has introduced an integrated triple differential receiver and adjustable cable equalizer with the industry’s highest equalized bandwidth at 300 meters and the lowest power consumption.
Read more Instrumentation amplifier combines power efficiency and zero-drift accuracy for portable medical, instrumentation and consumer devices
August 14, 2012
Analog Devices, Inc. has introduced the AD8237 micro-power, zero-drift precision instrumentation amplifier, offering a power-efficient solution for precision signal and sensor conditioning at a competitive price.
Read more Smallest single-lead heart-rate monitor analog front end offers industry's lowest power performance
August 6, 2012
Analog Devices, Inc. has introduced a low-power, single-lead, heart-rate monitor analog front end (AFE) for a wide range of vital sign monitoring applications.
Read more Industry leading D/A converter portfolio expands with new series of quad 16- and 12-bit 3V/5V D/A converters
August 1, 2012
Analog Devices, Inc. has introduced a second series of quad 16- and 12-bit 3V/5V D/A converters in space-saving 16-lead LFCSP and TSSOP packages.
Read more 36-V, 1-A step-down synchronous regulator simplifies intermediate power bus and point-of-load power designs
July 18, 2012
Analog Devices, Inc. has introduced the ADP2441, DC-to-DC switching regulator which is a 36-V, 1-A (amp) step-down regulator integrates both low-on-resistance and high-side and low-side power switches to provide compact point-of-load design and offers more than 94 percent efficiency.
Read more New release of free Analog Devices SPICE simulation tool visualizes component evaluation for linear design
June 27, 2012
Analog Devices, Inc., in collaboration with National Instruments Corp. (NI), has released the NI Multisim Component Evaluator – Analog Devices Edition.
Read more 10-DoF MEMS IMU features algorithm to deliver precise orientation sensing
June 26, 2012
Analog Devices, Inc. has introduced a 10-degree-of-freedom (DoF) MEMS inertial measurement unit (IMU) with an embedded sensor fusion algorithm that delivers accurate orientation sensing in platform stabilisation, navigation and instrumentation applications.
Read more Industry's fastest 12-bit, direct digital synthesizers target frequency-agile wireless applications
June 19, 2012
Meeting the demand for direct digital synthesis (DDS) technology that meets the needs of wireless applications requiring fast hopping and/or sweeping, Analog Devices, Inc. claims to have more than tripled the clock speed of previously available DDS ICs.
Read more 13-GHz PLL synthesizer operates at up to 110 MHz while consuming less than 100-mW
June 19, 2012
Analog Devices, Inc. is claiming the industry's highest performance 13 GHz PLL synthesizer. The ADF4159 achieves breakthrough phase detector operating frequency of 110 MHz and consumes less than 100 mW of power, which is five times less than competitive solutions.
Read more Dual, 16-bit, 1.25-GSPS, DAC incorporates a JESD204 serial input to simplify the FPGA interface
June 18, 2012
Analog Devices, Inc. has introduced a performance-leading 16-bit, 1.25-GSPS transmit D/A converter (DAC) with integrated complex digital modulation functionality, and featuring a JESD204A-compatible serial input.
Read more DC-DC switching controller features current-mode and voltage-mode options for high-current applications
June 12, 2012
Analog Devices, Inc. (ADI), has introduced a wide-input-range, synchronous, step-down DC-to-DC controller with voltage tracking and advanced clock synchronisation capability.
Read more Video amplifiers integrate short-to-battery protection and fault detection for automotive video applications
June 11, 2012
Analog Devices, Inc. has introduced a series of high-speed video amplifiers that integrate short-to-battery protection and fault detection for analog video systems in automotive safety and infotainment applications.
Read more Analog microcontroller with ARM Cortex M3 and dual 24-bit sigma-delta ADCs offer highest accuracy, lowest power
June 7, 2012
Analog Devices, Inc. has introduced the ADuCM360, a fully integrated, 4-kSPS, 24-bit data acquisition system-on-a-chip incorporating dual, high-performance, multi-channel sigma-delta A/D converters, a 32-bit ARM Cortex M3 MCU, and flash/EE memory.
Read more MEMS accelerometer draws only 300nA in motion-activated wake-up mode
June 5, 2012
Analog Devices has unveiled an ultra-low power 3-axis MEMS accelerometer that consumes 2µA at a 100Hz output data rate, and only 300nA in motion-triggered Wake-Up mode.
Read more High-G MEMS help detect concussions
May 25, 2012
Sports-related concussions have skyrocketed in the U.S. with over 3.8 million reported each year. New MEMS sensors small enough to be mounted inside an athlete's helmet, for example, could perform early detection of symptoms, giving doctors time to administer preventative therapies.
Read more Analog 3-axis, high-g MEMS accelerometer accurately measures concussive forces in high-impact events
May 24, 2012
Analog Devices, Inc. has introduced the industry’s first commercially available analog, 3-axis, high-g MEMS accelerometer. The ADXL377 measures acceleration of high-impact events resulting from shock and vibration, within the full-scale range of ±200 g with no signal saturation.
Read more Four-channel, 16-bit, 125-MSPS ADC claims superior dynamic performance and industry’s lowest power and package size for its class
May 17, 2012
Analog Devices Inc. has added a 4-channel high-speed A/D converter to the company’s data converter product portfolio.
Read more Multipoint LVDS transceivers offer 8 kV IEC ESD protection
May 11, 2012
Analog Devices' multipoint, low-voltage, differential signalling ADN469xE M-LVDS series includes eight transceivers, each of which is capable of connecting 32 data/clock nodes using a single differential cable pair at data rates of 100 Mbps or 200 Mbps.
Read more Isolated interface development environment for communication networks
May 10, 2012
Analog Devices introduced the ezLINX iCoupler isolated interface development environment, a plug-and-play platform that significantly reduces development time by enabling the evaluation of eight physical layer, digitally-isolated communication standards simultaneously (USB, RS-422, RS-485, RS-232, CAN, 2 x SPI, I˛C, and LVDS).
Read more Analog Devices holds 48.5 percent share of the worldwide data converter market
May 9, 2012
Market analyst company Databeans, Inc., has confirmed that Analog Devices leads the worldwide data converter market with a 48.5 percent share.
Read more Isolated half-bridge gate drivers feature digital isolator technology to deliver industry-best speed and reliability
May 8, 2012
Analog Devices, Inc. has introduced what the company claims id the industry's fastest and most reliable isolated half-bridge gate drivers.
Read more Voltage references deliver ultra-low noise, high accuracy and value for precision applications
April 30, 2012
Analog Devices, Inc. has introduced a series of voltage references offering the industry’s best combination of noise performance, initial output voltage accuracy, low temperature coefficient (TC), and excellent long-term stability at unmatched price points.
Read more Analog Devices appoints Anglia to help grow sales in UK and Ireland
April 26, 2012
Analog Devices Inc. has appointed Anglia as a UK and Ireland distributor. Analog Devices plans to expand the company’s sales channel network in Europe to achieve double-digit growth of its semiconductor business in the region over three years.
Read more 15-V 800-mA step down synchronous regulators deliver improve power efficiency and density for portable electronics
April 18, 2012
Analog Devices, Inc. has introduced an 800-mA output DC-to-DC regulators optimized for better energy efficiencies in battery-powered applications using multiple alkaline/NiMH, lithium cells, or other standard power sources.
Read more Analog Devices acquires Multigig to strengthen high-speed signal processing solutions
April 2, 2012
Analog Devices, Inc. has acquired Multigig, Inc., a privately-held San Jose, California, company specializing in highly innovative high-performance clocking technology. The acquisition will enhance ADI's clocking capabilities in stand-alone and embedded applications.
Read more Analog Devices optimizes processors for image processing
March 28, 2012
Advanced Driver Assistant Systems (ADAS), industrial machine vision applications and surveillance cameras have one thing in common: They have to process large amounts of image data in real-time. Analog Devices has developed a new series of its Blackfin processor family that has the capability to greatly speed up these processing steps.
Read more Multi-channel AFE energy measurement chip offers improve flexibility for broad range of monitoring applications
March 22, 2012
Analog Devices, Inc. , has introduced a single-chip energy measurement AFE (analog front end) that monitors the energy consumption and power quality of up to six electrical circuits. The ADE7816 energy measurement AFE is designed for data centre power distribution units, energy monitoring and management systems, and multi-channel electricity meters.
Read more Complete HART modem IC targets process control applications
March 5, 2012
Analog Devices has introduced a complete HART (Highway Addressable Remote Transducer) modem IC (integrated circuit) that enables HART connectivity in process control applications such as smart sensors and factory automation equipment.
Read more Enhanced design tool adds support for 29 new RF ICs and data converters
February 16, 2012
Analog Devices, Inc. has released a new version of the company’s ADIsimRF design tool which is a software accompaniment to Analog Devices’ complete portfolio of RF-to-digital functional blocks, allowing engineers to model RF signal chains using devices from across ADI’s RF IC and data converter portfolio.
Read more Analog Devices claims high-performance with the industry's lowest-noise MEMS microphone
February 14, 2012
Analog Devices, Inc. (ADI) has introduced the high-performance ADMP504 featuring the industry’s lowest-noise MEMS microphone. Delivering an SNR (signal-to-noise ratio) of 65-dBA, or 29-dBA EIN (equivalent input noise), the ADMP504 provides the same SNR performance as an array of two individual 62-dB SNR microphones. In addition, the ADMP504 provides an extended frequency response up to 20 kHz and a high PSR (power-supply-rejection) of 70 dBV.
Read more 11-bit 2.5-GSPS D/A converter increases number of QAM channels supported per D/A converter by up to 20 times.
February 13, 2012
Analog Devices, Inc. (ADI ) has introduced an 11-bit D/A converter that enables cable television and broadband operators to synthesise the entire cable spectrum up to 1 GHz into a single RF port, while consuming a maximum of 1.1 W of power.
Read more Synchronous regulator reduces board space and enables highly efficient power management
February 7, 2012
Analog Devices, Inc. has introduced the ADP2164, a 6.5-V, 4-A output DC-to-DC regulator featuring a high conversion efficiency of greater than 96 percent. The highly integrated ADP2164 regulator offers an input voltage supply range of 2.7 V to 6.5 V, an output range as low as 0.6 V and includes low on-resistance switching FETs to maximise efficiency while reducing board space.
Read more Analog Devices’ FMC boards support Xilinx’s FPGA targeted design platforms to help designers cut development times
January 31, 2012
Analog Devices, Inc. has introduced two data converter FMC boards (FPGA mezzanine cards) that connect to Xilinx Inc’s new 28 nm 7 series FPGA (field programmable gate array) evaluation kits. ADI’s high-speed AD9739A D/A converter and AD9467 A/D converter FMC boards support multiple generations of Xilinx kits - including the company’s new Kintex-7 FPGA evaluation kits Xilinx.
Read more Multi-output regulators with supervisory timers reduce component count, increase power density and reliability
January 24, 2012
Analog Devices, Inc. (ADI) is helping industrial, medical and communications equipment designers improve power system performance by reducing board space with the introduction today of the ADP5041 and ADP5040 multi-output regulators. The regulators meet the increasing demand for greater power density by combining a high-efficiency, 3-MHz, 1.2-A buck regulator and two 300-mA LDOs (low dropout regulators) in a small 20-lead LFCSP package.
Read more New PLL synthesizers deliver flexibility and phase noise performance
January 11, 2012
Analog Devices, Inc., has released two new PLL synthesizer that claim to allow utmost flexibility and phase noise performance. The ADF4151 and ADF4196 PLL synthesizers ease design in a variety of applications including communications infrastructure base-stations, pulse and Doppler radar applications, test and instrumentation equipment, microwave point-to-point systems, PMR (professional mobile radio), VSATs (very small aperture terminals) and aerospace systems.
Read more PLL synthesisers deliver high flexibility and phase noise performance
January 6, 2012
Analog Devices, Inc. has released two new PLL synthesisers that claim to allow the utmost flexibility and phase noise performance. The ADF4151 and ADF4196 PLL synthesisers ease design in a variety of applications including communications infrastructure base-stations, pulse and Doppler radar applications, test and instrumentation equipment, microwave point-to-point systems, PMR (professional mobile radio), VSATs (very small aperture terminals) and aerospace systems.
Read more 20-bit and 18-bit D/A converters provide stability and ultra-low noise to increase accuracy of instrumentation equipment
December 6, 2011
Analog Devices, Inc., has introduced digital-to-analog converters that provide high accuracy and ultra-low noise, simplifying the design of precision instrumentation and analytical equipment. The new high-accuracy D/A converters incorporate integrated precision reference conditioning circuitry, making them system ready and providing a 60 percent reduction in board space compared to competing standalone data converters.
Read more ADI and Richardson RFPD sign worldwide distributor deal to expand support for high-performance RF systems designers
December 2, 2011
Analog Devices, Inc., (ADI) has entered into a worldwide sales distribution agreement with Richardson RFPD, Inc. The deal will see Richardson RFPD, which is one of the leading distributors of RF and microwave components, support the design-in of ADI’s high-performance RF ICs (integrated circuits) along with the company’s full range of analog, mixed-signal and digital signal-processing products.
Read more 16-channel audio D/A converter provides high-performance audio at lower power
November 29, 2011
Analog Devices, Inc. has introduced a 16-channel audio D/A converter that is capable of improving audio system performance and reducing power consumption for professional, ‘prosumer’ and automotive audio equipment applications.
Read more MEMS accelerometers focus on precision to help archers hit targets
November 29, 2011
Analog Devices, Inc is providing the company’s i MEMS technology to a first-of-its kind measurement system used in high-precision archery. ADI’s ADXL346 3-axis digital MEMS (micro-electromechanical systems) accelerometer was selected by Full Flight Technology for use in the company’s flagship Velocitip Ballistic System, which is the first ever to use an arrow-mounted device to provide detailed information about arrow speed, flight dynamics and bow performance.
Read more Ultra-low-noise LDOs optimizes load performance in communications, medical and industrial systems
November 17, 2011
Analog Devices, Inc. , (ADI), has unveiled a pair of LDOs (low dropout regulators) with low noise, high power supply rejection, and excellent line and load transient response. The ADP7102 and ADP7104 LDOs achieve a 15 μVrms fixed-voltage noise figure, power supply rejection ratio (PSRR) of 60 dB at 10 kHz in 3-V operation, and feature reverse current protection to guard against shorts and sudden load discharges.
Read more 10-DoF MEMS IMU offers tactical grade performance
November 8, 2011
Analog Devices, Inc. (ADI) has released the third generation of the company’s i Sensor MEMS IMU (inertial measurement unit). The ADIS16488 is a tactical grade 10-degree-of-freedom (DoF) sensor and integrates a tri-axis gyroscope, tri-axis accelerometer, tri-axis magnetometer and a pressure sensor into a single package.
Read more ADI helps the Large Hadron Collider achieve highest possible superconducting magnet performance
October 26, 2011
The European Organisation for Nuclear Research (CERN) in Switzerland and the University of Sannio, Benevento, Italy, have collaborated on the design of an advanced instrument for measuring magnetic fields in CERN's Large Hadron Collider (LHC) superconducting magnets. Called the Fast Digital Integrator (FDI) board, this measurement device is using Analog Devices' A/D converters , analog multiplexers and DSP components to provide the LHC with the highest possible performance achieved to-date in measuring magnetic fields.
Read more Multiservice line card adaptive clock translators support wide range of wired communications applications
October 14, 2011
Analog Devices, Inc. has introduced two fully programmable jitter attenuating clock translator ICs that perform frequency translations for a wide range of wired communications applications - including Synchronous Ethernet and SONET/SDH optical networks - that require low jitter, fast time to market and cost effectiveness. The AD9557 dual-input multiservice line card adaptive clock translator and the AD9558 quad-input multiservice line card adaptive clock translator translate any standard input frequency to any standard output frequency from 2 kHz to 1.25 GHz with sub-400-fs RMS total jitter on 12 kHz to 20 MHz.
Read more Microwave PLL synthesiser eliminates frequency-doubling in broadband applications
October 11, 2011
Analog Devices, Inc., has introduced a PLL (phase-locked loop) frequency synthesiser that can be used to implement local oscillators as high as 18 GHz in the up-conversion and down-conversion sections of wireless receivers and transmitters.
Read more Analog Devices claims industry's fastest, low noise, low power, rail-to-rail amplifiers
September 29, 2011
Analog Devices, Inc., has unveiled a series of high-speed amplifiers that claims to establish a new performance standard with the best combination of high-speed, low noise and low power.
Read more Compact multi-axis MEMS vibration monitor provides low-noise performance and embedded analysis
September 26, 2011
Aiming to help industrial equipment designers improve system performance and reduce maintenance costs through more efficient vibration detection and isolation Analog Devices, Inc., is introducing the MEMS-based ADIS16228 i Sensor vibration monitor. The fully integrated vibration analysis system features an embedded programmable processor that provides directional sensing and spectral analysis to identify and classify individual sources of vibration.
Read more Medical MEMS tackles knee replacement
September 26, 2011
Currently, more than 30 percent of knee replacement surgeries suffer from misalignment problems caused by the "fog of surgery"–where the precise orientation of internal bones is difficult to determine. By adding a complement of Analog Devices' high-precision MEMS sensors to track the alignment and motion of a patient's knee just moments before the surgery, OrthAllign Inc., (Aliso Viejo,CA) aims to up alignment success rate to 100 percent.
Read more Energy metering IC provides high accuracy harmonic analysis for power quality monitoring
September 15, 2011
Analog Devices, Inc., has introduced an energy metering IC (integrated circuit) that offers real-time harmonic analysis for energy meters and power quality monitoring equipment. Designed for polyphase meters, the ADE7880 energy metering IC offers complete harmonic analysis, including magnitude and phase information, and delivers better than one percent accuracy over a dynamic range of 2000:1 up to the 63 rd harmonic.
Read more ADI releases new RF ICs to reduce component count, board space in broadband communications applications
September 12, 2011
Analog Devices, Inc. , has unveiled two VGA (variable gain amplifier) products that feature new levels of integration and performance for designers of broadband communications systems. The ADRF6516 VGA incorporates dual-channel, programmable, 6-pole low-pass filters and VGAs in a single chip. The company has also introduced the ADL5336 VGA, which for the first time integrates two IF (intermediate frequency) VGAs and a pair of programmable rms (root-mean-square) detectors.
Read more AV front-end enables cinema-quality sound and picture in home theater designs
September 8, 2011
Analog Devices, Inc., has introduced a highly integrated AV (audio/video) front-end for home theater designs that depend on superior AV processing and HDMI (High-Definition Multimedia Interface) Specification version 1.4 support for 3D display resolutions.
Read more MEMS gyroscope provides shock and vibration immunity for automotive applications
September 6, 2011
For automotive electronic stability control, rollover detection, and pitch detection applications, Analog Devices, Inc has introduced the ADXRS800 i MEMS gyroscope , featuring a patented differential quad-beam architecture designed to minimize the influence of linear shock and vibration. The ADXRS800 quad beam architecture provides 0.03°/sec/g of linear acceleration rejection while continuously monitoring the total electro-mechanical gyro performance.
Read more RMS-to-DC converter ensures accuracy and best-in-class dynamic range
August 15, 2011
Analog Devices, Inc. has unveiled an integrated true RMS-to-DC converter that offers a best-in-class 100 µV to 3 V of usable dynamic range and the ability to measure low signal levels with high accuracy and no drop in settling time.
Read more Analog Devices integrates two bucks regulators and two LDOs in smaller PMICs
July 20, 2011
Analog Devices, Inc. has introduced the ADP5034 regulator/LDO, a highly integrated power management IC that combines two 3-MHz, high efficiency, 1.2-A step down regulators with two 300-mA LDO regulators in a small LFCSP package. The company is also introducing the ADP5024 regulator/LDO, which is identical to the ADP5034 but features a single 300-mA LDO regulator.
Read more Dual output 20-V, 3-A switching regulator features high and flat conversion efficiency
July 18, 2011
Analog Devices, Inc., has introduced a 20 V, 3 A dual output DC-to-DC regulator featuring a high conversion efficiency of greater than 93 percent. The full featured ADP2323 regulator offers an input voltage supply range of 4.5 V to 20 V and an output range as low as 0.6 V up to 18 V at 1.5 percent voltage accuracy.
Read more MEMS-based digital inclinometer system delivers 0.1-degree roll/pitch accuracy
June 30, 2011
Analog Devices, Inc., has released the ADIS16210 MEMS i Sensor digital inclinometer system, which provides precise measurements for both pitch and roll angles over a full orientation range of ±180 degrees. The ADIS16210 integrates ADI’s i MEMS multi-axis accelerometer technology and signal processing expertise, adding addressable user registers for application tuning and programming, available over an SPI-compatible serial interface.
Read more 10-Degrees-of-Freedom MEMS sensor IMU helps simplify designs for unmanned vehicles
June 8, 2011
Analog Devices, Inc., (ADI) has released the ADIS16407 iSensor IMU (inertial measurement unit) which integrates a tri-axis gyroscope, tri-axis accelerometer, tri-axis magnetometer and a pressure sensor into a single package. Each sensor in the ADIS16407 combines ADI’s industry-leading iMEMS technology and signal conditioning expertise to optimise the IMU’s 10-DoF (degrees-of-freedom) dynamic performance.
Read more Differential RF/IF amplifier claims best-in-class performance for driving high-speed data converters
June 8, 2011
Analog Devices, Inc. has introduced a differential RF/IF (radio frequency/intermediate frequency) amplifier for driving high-speed 12-bit to 18-bit A/D converters. The ADL5565 differential amplifier features 3-dB bandwidth of 5 GHz and achieves unprecedented distortion, noise and IP3/IP2 performance out to 300 MHz.
Read more Integrated 1-Watt, 2-stage driver amplifiers address entire cellular frequency range
June 7, 2011
Analog Devices, Inc. has introduced two 1-W, 2-stage RF driver amplifiers featuring the ability to cover the entire cellular frequency range used in wireless communications systems. The highly-integrated ADL5605 driver amplifier (covering the 700-MHz to 1000-MHz frequency range) and ADL5606 driver amplifier (operating in the 1800-MHz to 2700-MHz range) provide two stages of pin-compatible, are easy-to-tune and integrate gain, thereby saving board space when compared to traditional discrete designs.
Read more New RF design tools simplify RF system development to speed time-to-market
June 1, 2011
Analog Devices, Inc. has released two new RF design tools to help design engineers to simplify their RF system developments.
Read more Chip makers join embedded vision group
May 31, 2011
More than a dozen vendors have joined a new industry group promoting computer vision in embedded systems. The Embedded Vision Alliance aims to provide education about the technology and help develop a broad range of emerging markets for it.
Read more High-temp MEMS goes seismic
High-speed data converters maximise receiver sensitivity and dynamic range for 3G and 4G cellular base stations
May 26, 2011
Analog Devices Inc. has introduced four high-speed data converter products that support signal sampling rates necessary to accommodate multi-carrier radio platform requirements for today’s 3G and 4G cellular infrastructure communication- standards, including CDMA2000, UMTS/LTE, TD-SCDMA and TD-LTE.
Read more Analog Devices introduces single-chip automotive radar frontend
May 26, 2011
Analog Devices introduced a single-chip front-end device handling different signals for automotive radar equipment, The AD8283 enables adaptive cruise control and blind spot detection in a single, cost-competitive IC.
Read more MEMS-based dual-axis accelerometer offers guaranteed high temperature operation up to +175 degrees C
May 23, 2011
Analog Devices, Inc., has released the ADXL206 high precision, low power, dual-axis iMEMS accelerometer with signal conditioned analog voltage outputs. The single-chip ADXL206 measures acceleration with a full-scale range of ±5 g and measures both dynamic acceleration such as tilt and static acceleration such as gravity.
Read more Analog Devices unveils first single-chip 5-kVrms RS-485 data transceivers
May 17, 2011
Analog Devices, Inc., has introduced the ADM2682E and ADM2687E, the industry’s first single-chip 5-kVrms signal- and power-isolated RS-485 data transceivers that meet the safety isolation requirements of high voltage systems in motor, power and energy control systems. The new data transceivers also feature ±15-kV ESD protection on the bus pins.
Read more High performance development platform enables rapid deployment of motor control systems
May 17, 2011
Analog Devices, Inc., in collaboration with Boston Engineering has demonstrated a development platform which can be used to design and optimise motor control systems with any type of motor.
Read more Switches offer guaranteed latch-up prevention, low charge injection and low leakage
May 16, 2011
Analog Devices, Inc., has introduced the ADG5212 and ADG5213 high-voltage, latch-up proof quad switches that offer guaranteed latch-up protection for industrial, instrumentation, and automotive applications operating at up to ±22 V.
Read more Analog Devices unveils industry-first mixers with wideband performance for multi-band communications
May 11, 2011
Analog Devices, Inc., has introduced what the company claims is the industry’s most highly integrated wideband passive mixers for communications applications. The ADL5811 single-channel and ADL5812 dual-channel mixers deliver unmatched linearity, low distortion and low noise combined with wideband frequency performance.
Read more D/A converter supports multi-carrier wireless standards using less PCB space
May 9, 2011
Analog Devices, Inc. , has introduced a 16-bit D/A converter for wired and wireless communication systems that features the industry's best combination of package size, speed and low noise. The latest member of ADI's TxDAC data converter portfolio, the 16-bit AD9146 D/A converter is claiming an industry leading data throughput rate of 1.2 GSPS and a low-noise specification of -164 dBm/Hz, in a 7 mm x 7 mm LFCSP package.
Read more Analog Devices unveils industry's first 3-GHz HDMI receiver
May 4, 2011
Analog Devices, Inc., has introduced the industry’s first 3-GHz HDMI receiver for advanced television solutions. The new dual input receiver incorporates HDMI (High-Definition Multimedia Interface) specification version 1.4a support 3D display resolutions and extended colourimetry.
Read more Apple becomes second largest buyer of consumer/cell phone MEMS sensors in 2010
May 2, 2011
Apple Inc., in 2010 rose one rank to become the world's second largest buyer of microelectromechanical system (MEMS) sensors for consumer electronics products and cell phones, as it snapped up parts for products including the iPhone 4 and iPod Touch, new IHS iSuppli research indicates.
Read more Si2 to form 3-D IC standards group
April 26, 2011
The Silicon Integration Initiative (Si2), an organization focused on the development and adoption of standards to improve IC design, is quietly forming a standards group for 3-D chips.
Read more Programmable LED driver enables independent control of nine LED sinks
April 21, 2011
Analog Devices, Inc., has released the ADP8866 LED charge pump backlight driver, which features independent control of nine LED current sinks, programmable LED blinking sequences and low operating current drain. Independent LED control allows designers to program different currents for each channel and enable them at different times.
Read more Data converter duo deliver the speed and performance at low power
April 19, 2011
Analog Devices, Inc., has introduced two new data converters designed to deliver the speed and performance at low power necessary for a range of communications and industrial applications. The AD9434, a low-power, 12-bit, 500-MSPS A/D converter reduces thermal considerations by consuming 660 mW of power in a space-saving 8 mm x 8 mm LFCSP package.
Read more Zero-drift amplifier from Analog Devices claims industry's lowest voltage noise
April 13, 2011
Analog Devices, Inc., has introduced what the company claims is the industry's lowest-noise, zero-drift operational amplifier. The ADA4528 zero-drift op amp is designed for instrumentation and medical applications that require precision over time and temperature without system calibration.
Read more Reference circuit program targets a growing challenge facing design engineers worldwide
March 18, 2011
In this news analysis article EE Times Europe Analog's editor, Paul Buckley, learns more about the concept behind ADI's upgraded Circuits from the Lab reference circuit program by talking with Dan Ledger who is Analog Devices' Worldwide Tools & Web User Experience Manager and the Program manager for Circuits from the Lab.
Read more ADI aims to help engineers solve design challenges in analog, RF and mixed-signal systems
March 15, 2011
Analog Devices, Inc., is aiming to help engineers save weeks of research and design time by extending the company's Circuits from the Lab reference circuit program to address what the company claims is a growing challenge facing engineers worldwide who are being asked to design products more quickly, with fewer iterations and using an ever broadening range of technologies requiring analog, RF, power and mixed-signal expertise.
Read more Zero drift current-sense amplifier offers high bandwidth performance
March 9, 2011
Analog Devices, Inc. has released the newest addition to the company's popular current-sense-amplifier product line. The AD8218 zero-drift, bi-directional current-sense amplifier offers design engineers a precision current-sense amplifier with the unique combination of high bandwidth and the lowest drift currently available in the market in a low-cost package.
Read more New generation of high performance MEMS gyros prepare to tackle harsh environments
March 9, 2011
In this news analysis article EE Times Europe Analog's editor, Paul Buckley, discusses the development of the new iMEMS gyroscopes launched by Analog Devices Inc., with Wayne Meyer, ADI's Marketing & Applications Manager MEMS and Sensor Technologies Division.
Read more Low-power iMEMS gyros offer high performance benefits under harsh vibration
March 1, 2011
Three new high-performance, low-power iMEMS gyroscopes featuring an analog output specifically for angular rate (rotational) sensing in harsh environments has been releasesd by Analog Devices, Inc (ADI).
Read more 14-bit D/A converter helps synthesize entire cable spectrum into a single RF port
February 23, 2011
Analog Devices, Inc. , has introduced a 14-bit D/A converter that enables cable television and broadband operators to synthesize the entire cable spectrum up to 1 GHz into a single RF (radio frequency) port, while consuming a maximum of 1.1 W of power. The AD9739A 14-bit, 2.5-GSPS D/A converter’s wide bandwidth and dynamic range enables cable operators to increase the QAM (quadrature amplitude modulation) channel densities by 20 times over the densities found in today’s cable modems.
Read more Low-power RF transceiver targets short-range wireless systems in industrial, science and medical applications
February 22, 2011
Analog Devices, Inc. has unveiled a highly integrated, low-power RF transceiver for operation in the global 2.4 GHz ISM (industrial, scientific and medical) frequency band. The ADF7241 RF transceiver is designed with emphasis on flexibility, ease-of-use characteristics, and low power consumption.
Read more RF demodulator integrates PLL synthesiser and VCO to deliver high performance and wide dynamic range
February 14, 2011
Analog Devices, Inc., has released a new high-performance integrated RF demodulator that performs multiple common RF functions in a single package while delivering the performance needed to support high dynamic range receivers in next-generation communications systems.
Read more Analog Devices unveils integrated AFE subsystem for diagnostic-quality ECG applications
February 9, 2011
Analog Devices, Inc., has introduced the first device in a new series of fully integrated analog front-end AFE chips that enable an electrocardiogram (ECG) system, which measures and records the electrical activity of a human heart in detail, to achieve monitor- and diagnostic-quality performance. The device also incorporates pacemaker pulse detection and respiration measurement, which are critical features of any high-performance ECG system.
Read more Sub-microamp quiescent current LDOs extend battery life in wireless devices
February 2, 2011
Analog Devices' ADP16x series of low-dropout regulators draw only 42 μA of quiescent current at full load with superior power-supply-rejection performance.
Read more ADI's SPICE simulation tool upgrade allows engineers to design larger, complex circuits
February 1, 2011
Analog Devices, Inc. (ADI) has collaborated with National Instruments (NI) on a new release of NI's Multisim component evaluation tool with added features and functionality to provide engineers with an easy-to-use environment for the simulation of linear circuits using ADI components.
Read more High-speed 8-bit A/D converters claim best-in-class power and noise performance
January 31, 2011
Analog Devices, Inc. has released two 8-bit, high-speed, low-power, low-noise A/D converters designed for instrumentation and communications applications. Both 8-bit high-speed A/D converters use a pipeline architecture and consume an industry-best 310 mW of power.
Read more iCoupler digital isolation technology offers satellite power protection solution
January 26, 2011
Analog Devices, Inc. (ADI) is providing the company's iCoupler digital isolation solution to Siemens Aerospace for its PowerSCOE system, a satellite power protection system that will shut down kilowatts of power within the satellite within microseconds in the case of an anomaly. Serving as the advanced technology group for Siemens AG, Siemens Aerospace designed the system with other applications in mind, such as smart grid power monitoring.
Read more ADI extends online education series with webcast to sharpen fundamental design skills
January 11, 2011
Analog Devices, Inc., is aiming to help engineers keep pace with the rapidly evolving industry by expanding its online educational offerings to include a new series for engineers seeking a better understanding of the basics of signal processing design essentials. The monthly "Fundamentals of Designing with Semiconductors for Signal Processing Applications" webcast series premieres on January 12 with ‘Sensors and How to Use Them’, presented by David Kress, a veteran analog applications engineer and currently the director of technical marketing for ADI.
Read more Low-power HDMI transmitters deliver flawless HD video and ultra-slim multimedia designs for portable electronics
January 10, 2011
Analog Devices, Inc., has introduced two of the industry’s smallest and thinnest low-power transmitters to incorporate HDMI version 1.4 specification support for 3-D display resolutions and extended colourimetry. With a 25 percent smaller footprint than competing offerings (3.45 mm x 3.45 mm x 0.505 mm), ADI's low-power transmitters - the 80 MHz ADV7525 and the 150 MHz ADV7526 - enable mobile device designers to achieve new levels of miniaturisation, flawless HD video performance and power efficiency.
Read more ADI adds dual output synchronous controller to power management portfolio
January 4, 2011
ADI’s new ADP1850 synchronous controller provides greater flexibility, integrates tracking and sequencing features, and can be configured as a dual-output or high-current interleaved DC-to-DC controller for input voltages ranging from 2.75 V to 20 V.
Read more The Top 10 most popular analog and mixed-signal technical articles of 2010
December 31, 2010
As 2011 looms on the horizon why don't you while away the rest of 2010 by checking out the most popular analog and mixed-signal technical articles of 2010 that appeared in EE Times Europe Analog.
Read more The Top 10 Most Popular Analog and Mixed Signal News Stories of 2010
December 22, 2010
So it is that time of year when you want to put your feet up after digging your car out of the snowdrift. While you are waiting for your Xmas turkey or nut cutlet to defrost you can pass the time by taking a peek at EE Times Europe Analog's Top 10 most popular news stories of 2010. The results are based on the news stories that were accessed by EE Times Europe Analog's readership since January 1, 2010.
Read more Low-power HDMI receivers deliver enhanced A/V system performance
November 30, 2010
Analog Devices, Inc., has introduced what the company claims is the industry’s smallest, single-chip receivers to incorporate HDMI (High-Definition Multimedia Interface) Specification version 1.4a support for 3-D display resolutions and extended colorimetry. ADI’s ADV7611 low-power, 165-MHz receiver and the ADV7612 225-MHz, dual-port receiver with Xpressview fast switching technology enable A/V (audio/video) designers to deliver rich feature sets and HD performance traditionally reserved for higher priced entertainment systems.
Read more Dual-supply supervisory ICs improve monitoring of microprocessors and FPGAs
November 17, 2010
Analog Devices, Inc., is introducing the ADM6305 and ADM6306 dual-voltage supervisors that provide high-voltage threshold accuracy of 1.2 percent for monitoring low voltage core rails. The new supervisory ICs are designed to monitor two supplies, provide a reset signal to digital processor-based systems and are ideal for dual supply processors and FPGAs.
Read more MEMS vibration analysis system offers compact solution for accurate vibration profiling
November 9, 2010
Analog Devices, Inc., is aiming to help industrial equipment designers improve system performance and maintenance costs through vibration detection/isolation/correction with the release of the new ADIS16227 iSensor vibration monitor.
Read more Analog Devices releases industry's first fully differential attenuating precision amplifier
November 9, 2010
Analog Devices, Inc., has released what the company claims is the industry’s first fully differential attenuating precision amplifier. The AD8475 amplifier solves a common problem in industrial, instrumentation and medical applications where signals up to ±10 V are interfaced to single-supply ADCs.
Read more Low-power receiver ICs advance ultrasound system design
November 8, 2010
Analog Devices, Inc., has launched the fourth generation of its octal (eight-channel) ultrasound receivers with the introduction of two new ICs that reduce system size, complexity, and power consumption for high-end, mid-range, and portable ultrasound systems. The need for smaller, faster, lower-power ultrasound equipment continues to grow as hospitals, medical clinics, and medical emergency units increasingly rely on more sophisticated ultrasound equipment for providing diagnostic imaging.
Read more New demodulator for broadband communication designs saves board space, reduces cost, and shortens design time
October 26, 2010
Analog Devices, Inc., has introduced a highly integrated demodulator for broadband applications, such as cellular base stations, satellite communications, point-to-point (PtP) radios and defence systems. ADI’s new ADRF6850 demodulator expands ADI’s RF/microwave product portfolio and offers the highest level of integration and functionality by combining five devices and three RF functions into one small-footprint, surface-mount chip.
Read more Digital isolator features integrated transformer driver and PWM controller
October 21, 2010
Analog Devices, Inc., has introduced what the company claims is the industry’s first digital isolator with an integrated transformer driver and PWM (pulse-width modulation) controller in a single package.
Read more Ultra-low-noise, low-power ADC drivers drive high fidelity signals at 20-MHz to 100-MHz
October 19, 2010
Analog Devices, Inc., has introduced low-power, low-noise drivers for 14-bit analogue-to-digital converters (ADCs). The ADA4930-1 and ADA4930-2 ultra-low-noise ADC drivers are capable of driving dc to 1.35-GHz signals while consuming 115 mW of power and operating with a single supply.
Read more New 16-Bit ADCs focus on high performance, wide bandwidths and ease of use
October 4, 2010
Talking to Paul Buckley, EE Times Europe Power Management’s editor, Jon Hall Analog Devices’ Strategic Marketing & Applications Manager High Speed Converters, explains the key features and benefits of the AD9467 16-Bit ADC.
Read more Variable gain amplifiers offer performance and integration benefits at RF and IF frequencies
September 28, 2010
Analog Devices, Inc., has introduced a series of highly integrated RF/IF variable gain amplifiers (VGAs) that claim to offer breakthrough levels of integration - combining up to four discrete RF/IF blocks into a single device.
Read more 250 MSPS 16-bit ADC claims new level of signal processing performance
September 27, 2010
Analog Devices, Inc., is claiming the industry’s fastest 16-bit analog-to-digital converter (ADC) with the unveiling of a 250 MSPS ADC that aims to provide a new level of signal processing performance for communications, test and measurement and defense electronics applications.
Read more Analog Devices and Silica partner to offer free power management seminars across Europe
September 16, 2010
Analog Devices and Silica, a division of Avnet, Inc., plan to host a series of ‘free to attend’ Power Management seminars across Europe.
Read more Class H VDSL line driver amplifier reduces broadband power use
September 9, 2010
Analog Devices, Inc., has introduced a dual-port DSL line driver Class H amplifier that reduces power consumption and system cost for designers of high-speed ADSL2+/VDSL2 line cards.
Read more ADI's MEMS wins the heart of palm-sized cardiopulmonary resuscitation device
August 26, 2010
Analog Devices wins medical grounds with the announcement that ZOLL Medical Corporation has selected the company's ADXL322 iMEMS low g high-performance accelerometer to enable a palm-sized CPR (cardiopulmonary resuscitation) device, the PocketCPR. The small unit converts motion into real-time measurement data to accurately read the rate and depth of CPR chest compressions.
Read more Mixed-Signal Front End ICs save space and reduce power in wireless communications equipment
August 19, 2010
Analog Devices has introduced 12-bit and 10-bit mixed-signal front-ends (MxFEs) that reduce power and board space for developers of wireless infrastructure and portable radio equipment.
Read more ADI partners Altera to streamline wireless infrastructure system development
August 10, 2010
Analog Devices, Inc., has introduced a high-performance development platform for wireless infrastructure equipment designers who need to quickly evaluate systems using DPD (digital pre-distortion) techniques in multi-carrier cellular base stations.
Read more Low power 16-bit dual ADC claims lowest noise performance in its class
July 29, 2010
Analog Devices, Inc. (ADI) has unveiled a dual, 16-bit 105 MSPS, low-power, low-noise, analogue-to-digital converter designed for high-performance data acquisition systems in medical imaging, industrial, spectrum analysis, multimode radio and radar applications.
Read more ADI - Xilinx collaboration streamlines base station design
July 29, 2010
Analog Devices Inc. has collaborated
with Xilinx Inc to introduce a radio architecture development platform
that helps multi-carrier cellular base station manufacturers reduce
engineering resources and improve time to market.
Read more Low-power JESD204A data converters offer board space savings communications applications
July 29, 2010
Analog Devices,Inc, has unveiled a pair of low-power, high-speed 14-bit analog-to-digital converters that incorporate the JESD204A data converter serial interface standard.
Read more Multi-carrier MS-DPD development platform aims to streamline base station design process
July 27, 2010
Analog Devices, Inc. has collaborated with industry leading programmable-logic vendor Xilinx Inc. to introduce a radio architecture development platform that helps multi-carrier cellular base station manufacturers reduce engineering resources and improve time to market.
Read more 1500-mA LED flash driver improves picture quality for camera-enabled mobile phones
July 19, 2010
Analog Devices, Inc., has introduced a 1500-mA white LED driver which is the latest addition to ADI's power management portfolio and its inductive-based flash driver class of devices.
Read more Multichannel, 16-bit DAC drives productivity, energy efficiency and reliability in industrial process control I/O systems
July 13, 2010
Earlier this month Analog Devices, Inc., unveiled an innovative16-bit 4-channel control IC featuring Dynamic Power Control circuitry which claims to offer four times greater channel density, up to 80 percent power savings together with a 75 percent reduction in thermal rise.
Read more Step-down dc-to-dc synchronous regulators enable high-density PoL designs
July 6, 2010
Analog Devices, Inc., has introduced the ADP2119 and ADP2120 dc-to-dc switching regulators, which are the latest in ADI's portfolio of integrated power management switching regulators.
Read more Multichannel data converter offers dynamic power control for first time
July 6, 2010
A multichannel digital-to-analog converter with innovative dynamic power control circuitry that claims to offer up to 80 percent power savings together with a 75 percent reduction in thermal rise has been unveiled by Analog Devices, Inc.
Read more Data converters and amplifiers help to search for dark energy and dark matter
June 30, 2010
Buried two kilometers under solid ice on one of the coldest continents on Earth, Analog Devices' data converter and amplifiers are helping scientists at the South Pole build the world's largest telescope to search for the smallest subatomic particles known to humankind.
Read more Precise MEMS inertial sensors offer performance gains for industrial designs
June 9, 2010
To help industrial equipment manufacturers more easily implement stabilization, navigation, and control features within their industrial system designs Analog Devices, Inc., is adding two highly integrated and precise MEMS inertial sensors to its product line of iSensor motion sensor products.
Read more Precise temperature sensors offer alternatives to thermistors and resistance temperature detectors
June 8, 2010
Analog Devices, Inc., has introduced two fully calibrated, 16-bit-resolution, high-linearity digital temperature sensors that claim to achieve the industry’s highest level of precision over a wide operating temperature range.
Read more 5-GHz differential amplifier is industry’s first to drive 1-GHz data converter signals
May 28, 2010
Analog Devices, Inc., has introduced what the company claims is the industry’s first 5-GHz differential amplifier capable of driving analogue-to-digital converter signals from DC to 1 GHz at half the power of competing products.
Read more Single-chip gyroscope provides high-performance angular rate sensing for flight safety tool
May 26, 2010
Analog Devices, Inc., is furnishing its high performance iMEMS gyroscope technology for a new aircraft flight safety and training tool developed by Appareo Systems, a Fargo, North Dakota, company that makes light weight flight data recorders and award winning 3-D flight analysis software.
Read more 4-to-20 mA 16-bit DAC targets loop-powered, smart transmitter applications
May 25, 2010
Analog Devices has introduced a precision 16-bit digital-to-analog converter with on-board power management circuitry designed for loop-powered, smart transmitter applications used in industrial equipment.
Read more Clocking ICs aim for improved performance in timing signal chain
May 21, 2010
Analog Devices, Inc. (ADI), has introduced two clock products that, when designed in as part of a complete timing signal chain, improve performance and reduce programming and design complexity in synchronous optical networks and wireless base stations.
Read more PLL synthesizer with 30-V charge pump targets microwave point-to-point systems
May 20, 2010
Analog Devices, Inc. ,(ADI) has introduced a new PLL (phase locked loop) synthesizer for a variety of applications, including microwave point-to-point systems, PMR (private mobile radio), VSATs (very small aperture terminals), test and instrumentation equipment, and aerospace systems.
Read more RF prescalers operate up to 18 GHz with low power consumption
May 10, 2010
Analog Devices, Inc., has introduced a new RF prescaler circuits for a variety of applications, including point-to-point radios, VSATs (very small aperture terminals) and microwave communication systems.
Read more 4-A dual-channel gate driver with digital isolation technology replaces optocouplers
May 5, 2010
Analog Devices, Inc has introduced a 4-A dual-channel isolated gate driver integrated with ADI's iCoupler digital isolation technology.
Read more RF mixers enable designs with high dynamic range and low noise requirements
May 4, 2010
Analog Devices, Inc., has introduced two new high-performance RF (radio frequency) passive mixers for a variety of wireless applications, such as cellular base station receivers, transmit observation receivers and radio link downconverters.
Read more High-speed quad DAC yields higher performance in wireless base stations
April 27, 2010
Analog Devices, Inc., has introduced what the company claims isthe industry’s first high-speed quad DAC (digital-to-analog converter) to provide support for multi-antenna wireless communications standards requiring the large bandwidths demanded by DPD (digital pre-distortion) transmit systems.
Read more RF ICs cut component count by 75 percent for broadband communications kit
April 6, 2010
Analog Devices, Inc. has unveiled two new RF ICs for broadband communications systems that reduce component count by more than 75 percent, without compromising performance.
Read more Class-D audio amplifiers reduce design complexity in portable electronics
April 1, 2010
Analog Devices, Inc., has introduced a pair of Class-D audio amplifiers for smart phones, GPS units and other handheld electronics where premium sound quality offers a major competitive advantage.
Read more Software library offers building blocks for video analytics
March 22, 2010
Analog Devices, Inc., is now offering a free comprehensive video primitives library for use in real time video analytics applications to address the increased developer demand for low cost, fast and efficient video technology software tools.
Read more DC-to-DC switching regulators simplify Power Bus and point-of-load power designs
March 16, 2010
Analog Devices, Inc., has added the ADP2300 and ADP2301 dc-to-dc switching regulators to the company’s portfolio of integrated power management switching regulators.
Read more 2.4 GHz ISM Band RF transceiver targets short-range wireless systems
March 8, 2010
Analog Devices Inc, has released an RF transceiver targeting short-range wireless systems in the global 2.4 GHz ISM (industrial, science and medical) band.
Read more Integrated lithium-ion battery protection circuit and safety monitor is unveiled by Analog Devices
March 5, 2010
Analog Devices, Inc., has unveiled a Li-ion battery monitoring and protection system that integrates all necessary components, including voltage and current measurement, signal isolation and safety monitoring.
Read more Silentium selects Blackfin processors to power ANC product solutions
March 3, 2010
Developer of spatial and broadband active noise control (ANC) technologies, Silentium Ltd has selected Analog Devices' Blackfin processors to power its ANC products.
Read more Analog Devices offers discounts on VisualDSP++ development tools and emulators
March 1, 2010
Analog Devices, Inc., is introducing a development tool discount program that is offering "bundles" of the company’s VisualDSP++ Integrated Development and Debugging Environment (IDDE) and emulator(s) at discounts.
Read more Looking ahead: Data converter trends for 2010
February 6, 2010
Converters are key to mixed-signal products; here's a perspective on where they are headed in terms of performance, power, and functionality from James Caffrey and Rob Reeder,
Analog Devices, Inc
Read more